Click image to view full size image
Description:
1. with 3m handwheel cable2. Accurate pulse output
3.DB-15 core interface
CNC remote Manual PulseGenerator NK-MPG-06
General DB-15 port, plugging and playing, and compatible withvarious kinds of CNC products;
Better anti-jamming and allowing long distancetransmission of signal, with 3 m handwheel wire;
High resolution, accurate pulse output;
Resolution: 100P/R; Handwheel (06) holding magnetfunction.
Knobs | |
Axis selection knob | OFF/X/Y/Z/4 |
Ratio selection knob | ×1×10×100 |
Rotation angle | 360 degrees, |
Pulse dial card | 100 grids, 1 pulse/grid |
Others | |
Power supply | 24v DC, for external I/O |
Interface | DB-15 |
Dimension | |||
Type (1) | NK-MPG-05 | ||
Type (2) | NK-MPG-06 | ||
Length | 119mm | ||
Width | 64mm | ||
Thickness | 73mm | ||
Handwheel Connection | |||
Serial No. | Color | Definition | |
1 | Red | -5~ 5V | |
2 | Black | GND | |
3 | Yellow | B | |
4 | White | A | |
5 | Red Flower | LED | |
6 | Black Flower | LED- | |
7 | Purple | COM | |
8 | Cyan | COM | |
9 | Blue | X 1 | |
10 | Brown Flower | X 10 | |
11 | Gray | X 100 | |
12 | Brown | X | |
13 | Green | Y | |
14 | Pink | Z | |
15 | Orange | 4 | |
CNC Manual Pulse Generator NK-MPG-06
